Parts & Accessories

Iroda RC-30 | Refillable fuel cells (2 Pack) | Fits Iroda Models: MJ-300 and MJ-600

The Iroda RC-30 replacement fuel cells are refillable and reusable fuel cartridges that are used in all the Iroda MJ-300 series torches as well as the Iroda MJ-600 Micro Therm.  Each fuel cell is partially filled and tested before it leaves our shop...

Eddy Mark IV Mica Heating Element | With Mica Wrap

The Eddy Mark lV break resistent mica heating element is exactly that; a lightweight and durable alternative to the standard ceramic heating element.  It's unique suspended design allows for quick element changes, prolongs element life and eases...

Eddy Mark IV Heat Gun | Toggle Switch | 20 Amp | 3 Position Off-Cold-Hot

Eddy Mark IV Replacement Toggle Switch: The Eddy Mark IV heat guns use an Eaton manufactured, 3 Position Toggle Switch (OFF-ON-ON).  We have these specially made just for our heat guns because of the rarety of the OFF-ON position settings on...

Eddy Mark IV Heat Gun | Brush Kit | Includes 2 Carbon Brushes, 2 Springs

Eddy Mark IV Heat Gun Replacement Brush Kit: Each Eddy Mark IV heat gun has two brush holders, one on the top side of the housing and one on the lower side.  Each brush holder contains a carbon brush, pressure spring and a brush holder cap the holds...

Eddy Mark IV Heat Gun | Brush Holder

The Eddy Mark IV heat guns have two brush holders, one on each side of the heat gun housing.  These brush holders contain the carbon brushes that completes the electrical circuit for the brushed motor used in all Eddy Mark IV heat guns. If you're...

Eddy Products VT-1100 | Master Appliance EC-200 | Variable Temperature Heat Gun Stand

VT-1100S - Heat Gun Stand: Model VT-1100S - Eddy Products VT-1100 Heat Gun Stand The Eddy Products VT-1100 Heat Gun Stand is the ideal solution for users that want that hands free experience or, need both hands to work on whatever application your using...

Iroda PS-10 | Hot Air Blower Tip | Flameless Heat Tip

Iroda PS-10, Hot Air replacement tip.  Fits Iroda and Solder-IT Solderpro Models: SP-100, SP-110, SP-120 and SP-150.  The Hot Air Blower tip has an adjustable temperature of up to 950 Deg. F (480 Deg. C) and ideal for shrink tubing, securing...

Eddy Mark IV Heat Gun | Field Assembly (Stator)

Eddy Mark IV Heat Gun Replacement Field Assembly (Stator): Eddy Mark IV heat guns have a brushed style motor, consisting of a field assembly (stator) and an armature (rotor).  Furthermore, the heat gun has two brush holders, two carbon brushes and...

Iroda CT-16 Bladed Tip | Fits Solderpro Models: SP-100, SP-110, SP-120 and SP-150

The Iroda CT-16 Bladed replacement tip is a unique specialty tip offered by Iroda and is specifically used by wood workers or craftsman to repair scratches in wood  products such as wood floors, tables and furniture.  

Eddy Mark IV "Large" Heat Shrink Reflector - for 2" O.D

For added versatility and utilization of Eddy Heat Guns, a selection of slip-on attachments are available to adapt the unit for processing different size shrink tubing connectors.  The shrink tube reflectors in two sizes handle MOST requirements...

Iroda PS-14 | Orifice Assembly | Fits Solderpro Models: SP-100, SP-110, SP-120 and SP-150

Iroda PS-14, replacement Orifice Assembly. The Orifice Assembly should be cleaned or replaced when: 1) Soldering iron does not ignite, 2) There's low gas pressure or low flame, or 3) The tip does not ignite.  Keep in mind that simply replacing the...

Eddy Mark IV "Small" Heat Shrink Reflector - for 3/4" O.D

For added versatility and utilization of Eddy Heat Guns, a selection of slip-on attachments are available to adapt the unit for processing different size shrink tubing connectors.  The shrink tube reflectors in two sizes handle MOST requirements...